hard reset procedure for dopod 900

You may need to reset your Pocket PC Phone. Normal (or soft) reset of your device clears all active program memory and shuts all running programs. This can be useful if the device is running slower than usual, or not working the program correctly. Soft reset is required after the installation of some programs. When soft reset is performed when running programs that are stored data is lost.

You can also called a hard reset (also known as a full reset). Hard reset should be performed only if a normal reset does not solve the system problem. Restored if a hard reset the device to its default settings, as was the purchase of the first IT and switched on. All programs installed, data you entered and to adapt to the loss. Only Windows Mobile software and other preinstalled programs will continue.

To perform a soft reset

• Use the stylus to lightly press and hold the RESET button on the
left side of your device.
The device restarts and displays the Today screen.

Warning! Always turn off your device before performing a soft reset or
installing/replacing the battery and SIM card.



To perform a hard reset

• Press and hold both SOFT KEYS shown enclosed by circles in
the picture below. Keep these keys pressed, and at the same
time, use the stylus to lightly press and hold the RESET button
on the left side of your device. Press either 0 to restore to factory
default or X to exit the hard reset process.

Related Post: